home

Home

about-us

About Us

welcome

Welcome

shipping-returns

Shipping & Returns

contact-us

Contact Us

all-products

Services

for-my-car

For My Car

for-my-bike

For My Bike

Footer

Terms & Conditions
Please read these Terms and Conditions ("Terms", "Terms and Conditions") carefully before using our webstore operated by our company/entity. ("us", "we", or "our"), or the services provided therein (the “Service”).  These Terms apply to all visitors, users and others who access or use the Service. 
Your access to and use of the Service is conditional upon on your acceptance of and compliance with these Terms.  By accessing or using the Service you agree to be bound by these Terms. If you disagree with any part of the terms, do not access or use the Service. 
We reserve the right to revise these Terms from time to time. Please check these Terms from time to time for any amendments. Your continued use of the Service after these Terms have been amended will be deemed to constitute your acceptance of the amended Terms.


Placing an Order
To place an order through our webstore, click on the product that you wish to purchase and follow the onscreen instructions. Your purchase of the product shall be subject to the terms and conditions contained in our webstore in relation to the product.    
You should take care to ensure that all the information you provide to us is correct. Please check your Order before submitting it to us. If you are placing an Order for a product which is digital content, you must check that the specifications of your computer or device meet the hardware and software requirements.
After you have placed an Order, we will send an email to you acknowledging that we have received your Order. This acknowledgement does not, however, mean that your Order has been accepted by us.
We are not obliged to accept your Order and may at our discretion decline to accept any Order. In the event we decline to accept an Order, we may send an email to you notifying you that we do not accept your Order. This is typically for the following reasons:
a.	the product is not available;
b.	we cannot authorise your payment;
c.	you are not allowed to purchase the Product from us under the applicable law;
d.	we are not allowed to sell the Product to you under the applicable law; or
e.	there has been an error in the pricing or description of the product.


When we accept your Order, we will confirm such acceptance by sending an email to you confirming that we have received your Order and will be preparing to ship the product to your address or, in the case of Products which are digital content, providing you with instructions on how the digital content can be downloaded (“Confirmation Email”). A binding contract in respect of the product ordered will be formed between you and us when the Confirmation Email is sent to you.


Cancellation & Refund
If you change your mind, or the product you received is not what you expected or are otherwise not satisfied with our product, please contact us before returning the item. 
You have [fourteen days] to return an order after receiving it.
If the product or packaging is used or damaged, we reserve the right to deduct any depreciation in value when refunding the product. 
Unless otherwise agreed upon, the refund will be processed through the same payment method you used to make your original purchase.


Shipping & Delivery
Products in stock are normally delivered within the number of working days shown on our website.
We will deliver the Products to the address given in your Order. If no one is at the address at the time of delivery, we will inform you of an alternative time for the delivery or a location where you can collect the Products.
Unless arrangements are made with us, you must cover the cost of the return. We reserve the right to not allow for returns or exchanges to our products. 
Please note that exceptions may apply for the return of certain custom-made, hygienic and other products
You are responsible for any damage incurred by items during the return shipment. We therefore strongly recommend that you send the products well packaged, in good condition and in their original box and/or packaging.
If possible, please provide us with a tracking number for the return shipment.
If a returned item is shipped internationally, mark as “RETURNED GOODS” to avoid any Customs charges. We are not responsible for any charges imposed on packages returned by Customs.
If you have any questions, please contact us.


Disclaimer
The information contained on our webstore is for general information purposes only. We assume no responsibility for errors or omissions in the contents of our webstore or in the course of providing the Service. In no event shall our company be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence or other tort, arising out of or in connection with the use of our products, our webstore or the Service. 
We reserve the right to make additions, deletions, or modification to the contents on the webstore at any time without prior notice. We do not warrant that the webstore is free of viruses or other harmful components. 
You agree that we do not make any representations or warranties of any kind (implied, express or statutory) including warranties as to merchantability, satisfactory quality or fitness for a particular purpose, in respect of our products and/or the Service.  In addition, we do not make any representations or warranties that any digital content which we supply to you is (i) compatible with any third party software or equipment; or (ii) free of errors or bugs.


Privacy
The security of your Personal Information is important to us, but remember that no method of transmission over the Internet, or method of electronic storage, is 100% secure. While we strive to use commercially acceptable means to protect your Personal Information, we cannot guarantee its absolute security. 
We may use your Personal Information to contact you with newsletters, marketing or promotional materials.


Governing Law and Jurisdiction
These Terms shall be governed by and construed in accordance with the laws of the country which we have our primary place of business in. All disputes arising out of or in connection with these Terms shall be submitted to the exclusive jurisdiction of the Courts of the said country.


Header

Paint protection film (PPF), also known as clear bra, is a transparent film applied to the exterior of a vehicle to protect it from various forms of damage. Here's a detailed explanation of the process and its uses:

*Process:*

1. *Preparation*: The vehicle's exterior is thoroughly cleaned to ensure there are no contaminants like dirt, dust, or wax that might interfere with the adhesive properties of the film.

2. *Cutting the Film*: The PPF comes in rolls and needs to be custom-cut to fit the specific contours and dimensions of the vehicle's body panels. This can be done either by hand or with computer-aided cutting machines that are pre-programmed with templates for various car models.

3. *Application*: The film is carefully applied to the surface of the vehicle. It is positioned in such a way that it provides full coverage while avoiding any wrinkles, bubbles, or misalignments. This process requires skill and experience, especially for complex areas like curves, edges, and corners.

4. *Trimming and Wrapping*: After applying the main pieces of PPF, the installers may need to trim away excess material and wrap edges around curves or corners to ensure a seamless appearance.

5. **Heating and Stretching (Optional)**: In some cases, especially for more intricate areas, heat may be applied to the film to make it more pliable, allowing for a more precise fit.

6. *Curing and Inspection*: The film needs time to properly adhere to the vehicle's surface. After application, it's left to cure for a specific period. Once cured, the installer inspects the film for any imperfections.

*Uses:*

1. *Protection from Road Debris*: PPF acts as a barrier against stone chips, gravel, and other debris that can cause small dings, chips, or scratches on the paint.

2. *Preventing Bug Damage*: It helps shield the vehicle from bug splatter, which can be acidic and may damage the paint over time.

3. *Protection from Environmental Factors*: PPF guards against environmental factors like bird droppings, tree sap, and harsh weather conditions that can harm the vehicle's finish.

4. *UV Resistance*: PPF has UV inhibitors that protect the paint from fading or discoloration due to prolonged sun exposure.

5. *Preservation of Resale Value*: A well-maintained vehicle with protected paint can command a higher resale value.

6. *Maintaining Aesthetic Appeal*: It maintains the original appearance of the vehicle, allowing the paint to shine through without any noticeable change in texture or finish.

7. *Ease of Cleaning*: PPF makes cleaning easier as it provides a smooth surface that's less prone to dirt and contaminants sticking to it.

8. **Self-Healing Properties (Some Films)**: Higher-end PPFs have self-healing properties, meaning they can repair minor scratches or swirl marks with the application of heat.

Remember that the quality of installation is crucial for the effectiveness of the PPF. It's recommended to have it applied by a professional with experience in handling and installing these films.

Paint protection film

bike ceramic coating is a protective layer applied to the exterior of a vehicle to safeguard its paint and provide a glossy finish. Here's a detailed overview of the process:

1. *Vehicle Preparation*:
   - *Wash and Decontaminate*: The car is thoroughly cleaned to remove dirt, grime, and contaminants. This typically involves a thorough wash, followed by a decontamination process using clay bars or chemical decontaminants.

2. **Paint Correction (Optional)**:
   - *Polishing and Compounding*: If the paint has imperfections like swirl marks, scratches, or oxidation, a paint correction process may be done. This involves using abrasive compounds and polishes to level the surface.

3. *Surface Inspection*:
   - *Visual Examination*: The car's paint is inspected to ensure it's free of any imperfections and is ready for coating. Any remaining defects may require further correction.

4. *Application of Ceramic Coating*:
   - *Panel by Panel Application*: The coating is applied in small sections, typically one panel at a time, to ensure even coverage and prevent the product from drying too quickly.

   - *Use of Applicator Pads*: A microfiber or suede applicator pad is used to apply the ceramic coating. This helps in spreading the product evenly.

   - *Leveling and Curing*: After application, the coating is allowed to sit for a short period. Then, it is leveled using microfiber towels to ensure an even coat. Depending on the specific product, curing times may vary.

5. *Buffing and Polishing*:
   - *Final Touch-Up*: After curing, the coated surface is buffed to remove any residue or high spots that may have formed during the application process.

6. *Final Inspection*:
   - *Quality Check*: The entire vehicle is inspected to ensure the coating is applied uniformly and there are no visible imperfections.

7. *Curing Time*:
   - *Allowing for Full Cure*: The vehicle is usually kept in a controlled environment, free from dust and moisture, for a period specified by the coating manufacturer. This allows the coating to fully cure and bond with the paint.

8. *Post-Coating Care*:
   - *Avoid Washing for a Specific Period*: Depending on the specific product, there may be a recommended period during which the car should not be washed to allow the coating to fully cure.

   - *Regular Maintenance*: To prolong the life of the ceramic coating, it's important to follow proper maintenance routines, which may include using specific detailing products designed for coated surfaces.

9. *Optional Additional Layers*:
   - *Layering for Enhanced Protection*: Some enthusiasts choose to apply multiple layers of ceramic coating for added durability and gloss.

Remember that the process may vary slightly depending on the specific brand of ceramic coating being used, and it's crucial to follow the manufacturer's instructions for the best results. If you're not experienced with applying ceramic coatings, it's advisable to seek professional help to ensure the best outcome.

Bike Ceramic Coating Stage 1 

Car ceramic coating is a protective layer applied to the exterior of a vehicle to safeguard its paint and provide a glossy finish. Here's a detailed overview of the process:

1. *Vehicle Preparation*:
   - *Wash and Decontaminate*: The car is thoroughly cleaned to remove dirt, grime, and contaminants. This typically involves a thorough wash, followed by a decontamination process using clay bars or chemical decontaminants.

2. **Paint Correction (Optional)**:
   - *Polishing and Compounding*: If the paint has imperfections like swirl marks, scratches, or oxidation, a paint correction process may be done. This involves using abrasive compounds and polishes to level the surface.

3. *Surface Inspection*:
   - *Visual Examination*: The car's paint is inspected to ensure it's free of any imperfections and is ready for coating. Any remaining defects may require further correction.

4. *Application of Ceramic Coating*:
   - *Panel by Panel Application*: The coating is applied in small sections, typically one panel at a time, to ensure even coverage and prevent the product from drying too quickly.

   - *Use of Applicator Pads*: A microfiber or suede applicator pad is used to apply the ceramic coating. This helps in spreading the product evenly.

   - *Leveling and Curing*: After application, the coating is allowed to sit for a short period. Then, it is leveled using microfiber towels to ensure an even coat. Depending on the specific product, curing times may vary.

5. *Buffing and Polishing*:
   - *Final Touch-Up*: After curing, the coated surface is buffed to remove any residue or high spots that may have formed during the application process.

6. *Final Inspection*:
   - *Quality Check*: The entire vehicle is inspected to ensure the coating is applied uniformly and there are no visible imperfections.

7. *Curing Time*:
   - *Allowing for Full Cure*: The vehicle is usually kept in a controlled environment, free from dust and moisture, for a period specified by the coating manufacturer. This allows the coating to fully cure and bond with the paint.

8. *Post-Coating Care*:
   - *Avoid Washing for a Specific Period*: Depending on the specific product, there may be a recommended period during which the car should not be washed to allow the coating to fully cure.

   - *Regular Maintenance*: To prolong the life of the ceramic coating, it's important to follow proper maintenance routines, which may include using specific detailing products designed for coated surfaces.

9. *Optional Additional Layers*:
   - *Layering for Enhanced Protection*: Some enthusiasts choose to apply multiple layers of ceramic coating for added durability and gloss.

Remember that the process may vary slightly depending on the specific brand of ceramic coating being used, and it's crucial to follow the manufacturer's instructions for the best results. If you're not experienced with applying ceramic coatings, it's advisable to seek professional help to ensure the best outcome.

Car Detailing and Stage 2 Ceramic Coating

Car Detailing and Stage 1 Ceramic Coating

Bike Ceramic Coating Stage 2

A car graphene coating is an advanced form of protective coating applied to the exterior of a vehicle. It utilizes graphene, a single layer of carbon atoms arranged in a hexagonal lattice, known for its exceptional strength, conductivity, and other unique properties. Here are the key details about car graphene coatings:

1. *Exceptional Durability*:
   - Graphene coatings are renowned for their extreme durability and resistance to environmental elements. They can provide a long-lasting shield against UV rays, oxidation, chemicals, and physical abrasions.

2. *High Gloss Finish*:
   - Graphene coatings offer an incredibly high-gloss finish, providing a deep and reflective shine to the vehicle's paintwork. This can enhance the overall appearance of the car.

3. *Hydrophobic Properties*:
   - One of the standout features of graphene coatings is their hydrophobic nature. This means that water and other liquids tend to bead up and roll off the surface, making it easier to clean and reducing water spots.

4. *Chemical Resistance*:
   - Graphene coatings provide a protective barrier against a wide range of chemicals and contaminants, including acidic substances, bird droppings, and bug splatter.

5. *Thermal Conductivity*:
   - Graphene is an excellent conductor of heat, which means it can help dissipate heat from the surface of the vehicle. This can potentially reduce the risk of paint damage from excessive heat exposure.

6. *Flexibility and Adhesion*:
   - Graphene coatings are known for their flexibility, allowing them to adhere well to the contours of a vehicle's body. This ensures an even and consistent application.

7. *Application Process*:
   - Applying a graphene coating involves a meticulous process:
     - *Preparation*: The vehicle is thoroughly washed and decontaminated to ensure a clean surface.
     - **Paint Correction (Optional)**: If necessary, imperfections in the paint are addressed through processes like polishing and compounding.
     - *Application*: The coating is applied in small sections, one panel at a time, using a specialized applicator pad. It's then allowed to cure for a specified period.
     - *Buffing and Inspection*: After curing, the coated surface is buffed to remove any residue and inspected for quality.

8. *Curing Time*:
   - The vehicle is typically kept in a controlled environment, free from dust and moisture, for a period specified by the coating manufacturer. This allows the coating to fully cure and bond with the paint.

9. *Post-Coating Care*:
   - Following application, it's advisable to avoid washing the vehicle for a specific period to allow the coating to fully cure. Regular maintenance using recommended detailing products can help extend the coating's lifespan.

10. *Professional Application*:
    - While some enthusiasts may choose to apply graphene coatings themselves, seeking professional help is recommended for optimal results, especially if one lacks experience with specialty coatings.

Remember that the effectiveness and longevity of a graphene coating can vary depending on factors like the quality of the product and the application process. Following the manufacturer's instructions is crucial for achieving the best results.

Bike Graphene Coatings

Car Detailing and Nano Graphene Coating

Bike Wash

Car Wash

Bike Wash, Detail, Correction + Sealant

Wash and preparation of the machine.
Rectifying the scratches within the clear coat with two step correction.
Sealant coating.

Car - 2 Step Correction and Sealant 

thorough wash, removal of pollutants like tar fumes and carbon monoxide residue and a professional wax application.

Bike Wash and decontamination+ wax + Lube